2.4GHz 1.1KM NRF24L01 Wireless Transceiver Module With antenna
(0) 0 Reviews 0 Orders 0 Wish listed
UGX25,000.00
Quantity :
Total price :
  (Tax : )
Out of stock

The nRF24L01+PA+LNA 2.4GHz  RF Wireless Modules are RF transceiver modules that can be used for wireless communications up to 1100 meters. These modules operate the same as the standard nRF24L01+, but it adds a power amplifier and detachable antenna to give it an extended range of 1100 meters vs the 100 meters of the standard nRF24L01+.  The maximum range will vary depending on data rate chosen , on whether there are obstructions to the signal. The modules operate in the 2.4GHz band at data rates of 250Kbps, 1Mbps or 2Mbps.  Max operating current is < 115mA.


Specifications:

·       The nRF24L01+ is a 2.4GHz ISM band transceiver

·       Range: 800+ meters line of sight (refer to "Important Note" section below)

·       Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier)

·       A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).

·       The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V.

·       The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.

·       Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).

·       The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.

·       Auto-acknowledge and auto-retransmit abilities

·       Weight: 13.28 g (0.468 oz)

·       Board dimensions, excluding pins: 15.5mm (0.61") width x 40.7mm (1.6") length x 12.2mm (0.48") height

·       Dimensions of antenna, when angled at 90 degrees: 87mm (3.43") height x 9.5mm (0.37") diameter

No review given yet!

Fast Delivery all across the country
Safe Payment
7 Days Return Policy
100% Authentic Products
You may also like
LM358 Low Power Dual Operational Amplifier
UGX1,500.00
LM317T LM317 Adjust Voltage Regulator IC 1.2V to 37V 1.5 Adjustable
UGX1,500.00
DS3231 RTC Module
UGX22,000.00
Original CD4511BE CD4511 4511 BCD TO 7 SEGMENT LATCH DECODER IC
UGX3,000.00
Mini HDMI Male To HDMI 19 Pin Female Adapter for Raspberry pi Zero
UGX10,000.00
Total price :
  (Tax : )
Top