The W1209 is an
incredibly low cost yet highly functional thermostat controller. With this
module (HCTHER0006) you can intelligently control power to most types of
electrical device based on the temperature sensed by the included high accuracy
NTC temperature sensor. Although this module has an embedded microcontroller no
programming knowledge is required. 3 tactile switches allow for configuring
various parameters including on & off trigger temperatures. The on board
relay can switch up to a maximum of 240V AC at 5A or 14V DC at 10A. The current
temperature is displayed in degrees Centigrade via its 3 digit seven segment
display and the current relay state by an on board LED.
Note: This module uses on-board non-volatile memory to store
changes made to its settings. Therefore any changes made will be saved even if
power is removed from the module.
Features:
Temperature Control Range: -50 ~ 110 C
Resolution at -9.9 to 99.9: 0.1 C
Resolution at all other temperatures: 1 C
Measurement Accuracy: 0.1 C
Control Accuracy: 0.1 C
Refresh Rate: 0.5 Seconds
Input Power (DC): 12V
Measuring Inputs: NTC (10K 0.5%)
Waterproof Sensor: 0.5M
Output: 1 Channel Relay Output, Capacity: 10A
Power Consumption
Static Current: <=35mA
Current: <=65mA
Environmental Requirements
Temperature: -10 ~ 60 C
Humidity: 20-85%
Dimensions
48mm x 40mm x 14mm
Settings Chart
Long press the “SET” button to activate the menu.
Code Description Range Default Value
P0 Heat C/H C
P1 Backlash Set 0.1-15 2
P2 Upper Limit 110 110
P3 Lower Limit -50 -50
P4 Correction -7.0 ~ 7.0 0
P5 Delay Start Time 0-10 mins 0
P6 High Temperature Alarm 0-110 OFF
Long pressing +- will reset all
values to their default
No review given yet!
Fast Delivery all across the country
Safe Payment
7 Days Return Policy
100% Authentic Products
You need to Sign in to view this feature
This address will be removed from this list
english
