The ADXL335 is low power, a complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module is a 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V). An accelerometer is an electro-mechanical device that will measure acceleration forces. These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.

Applications :

• FPV, RC, and Robots systems
• GPS navigation systems
• Impact recognition and logging

• Gaming and virtual reality input devices
• Motion-activated function

• Intelligent power saving for handheld devices
• Vibration monitoring and compensation

  Features :

• Simple 5 pin interface (VCC, GND, Xout, Yout, Zout, Self Test)

• Needs no external component

• Easy to mount on General purpose PCB, Breadboards, and special PCBs

• High Sensitivity for small movements
• Fast Turn-On Time

• Integral Signal Conditioning with Low Pass Filter
• Robust Design, High Shocks Survivability

• Build-in ultra-low noise linear LDO voltage regulator

• Can be interfaced with 3.3V or 5V Microcontroller.

• All necessary Components are populated.

• Tap/Double Tap Detection

• Free-Fall Detection

• Analog output

• Built-in onboard filters, which reduce noise from the motor and other high current electronics

• Build in the Logic level converter for I2C

• Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V

• Low Voltage Operation: 5V

• Low Current Consumption: 500 μA

Package Content:

1 x ADXL335 Module