This is LCD 1602 Parallel LCD
Display that provides a simple and cost-effective solution for adding a 16×2
White on Liquid Crystal Display into your project. The display is 16 character
by 2 line display has a very clear and high contrast white text upon a blue
background/backlight.
This is great blue backlight LCD
display. It is fantastic for Arduino based project. This LCD1602 LCD Display is
very easy to interface with Arduino or Other Microcontrollers.
This display overcomes the drawback
of LCD 1602 Parallel LCD Display in which you’ll waste about 8 Pins on your
Arduino for the display to get working. Luckily in this product, an I2C adapter
is directly soldered right onto the pins of the display. So all you need to
connect are the I2C pins, which shows a good library and little of coding.
The I2C is a type of serial bus
developed by Philips, which uses two bidirectional lines, called SDA (Serial
Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up
resistors. The usage voltages are standard as 5V and 3.3V.
If you already have the I2C adapter
soldered onto the board like in this product, the wiring is quite easy. You
should usually have only four pins to hook up. VCC and GND of course. The LCD
display works with 5 Volts. So we go for the 5V Pin.
The values shown on the display can
be either a simple text or numerical values read by the sensors, such as
temperature or pressure, or even the number of cycles that the Arduino is
performing.
Specifications & Features :-
Package Includes:-
1 x 1602 (16x2) LCD Display
with I2C/IIC interface - Blue Backlight
* Product Images are shown for
illustrative purposes only and may differ from actual product.
No review given yet!